Carbon Black Content Tester Carbon Black Content Test Device GA-1935

Instrument introduction：

The carbon black content tester is applicable to the determination of carbon black content in polyethylene, polypropylene, polybutylene plastics, cable and optical cable insulation and sheath materials, and rubber. Comply with national standards GBT 3515-2005, GBT 13021-1991, GB/T2951.41-2008, IEC60811-4-1:2004, etc. A certain amount of samples were pyrolyzed in nitrogen flow at high temperature, and the carbon black content was obtained by analyzing the weight of pyrolyzed samples.

Technical parameters：

1.Display mode：7 inch capacitive touch screen

2.Quartz tube size：φ44×600±5mm

3.Furnace size：Φ45×300±5mm

4.Heating element: high-temperature alloy wire

5.Length of heating zone：250mm

6.Working temperature：Room temperature~1150℃

7.Temperature control mode: intelligent programmable control, sectional program can be set.

8.Working power supply：AC220V/50HZ/60HZ

9.Sensor sensitivity：0.1℃

10.Air circuit control: two circuits, automatic program switching

11.Cooling mode: fast cooling（≤20min，900℃To room temperature）

12.Number of test samples: 4 samples at a time

13.Data calculation: the software has its own calculation function, one click calculation; The carbon black content and ash content can be calculated automatically.

14.Customized guide rail type sample rack, convenient for taking and setting out

15.Open cover type, fast cooling

16.With tail gas filter

17.With printing function

Product highlights：

Technical characteristics:

Beautiful appearance and structure, simple operation.

Integrated design of heating furnace body and control system, convenient for user's instrument management.

High degree of automation, just set the temperature value and heating time, and the instrument automatically heats up to the set value.

High temperature control accuracy, wide temperature range and high furnace temperature uniformity.

7 inch LCD touch screen display, extremely friendly operation interface, one key operation startup.

It has excellent thermostatic function and can set the thermostatic time with high thermostatic accuracy.

The instrument can be set with any group of different heating time periods, and can have different heating temperature, heating rate, and constant temperature time.

The parameter display is comprehensive, showing the number of sets, theoretical temperature, actual temperature, heating time (or constant temperature time).

During the operation of the instrument, the set parameters and the time of temperature rise or constant temperature can be viewed.

Configuration list：